Bando TL20H150 TL Timing Belt Pulley (1215) Hazardous LocationBando TL20H150 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
68 Ohms A Ph / 0 Ohms B Ph Start Configuration DOL Break-Down Torque 10 LB-FT Pull-Up Torque 8
732" Terminal Block Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 3002 207N (ISO 12944 - C2) Grounding Lugs Superior Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap No-Without Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Resilient Base Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 12 Features
Output HP1/2 MAX Hp
93 % Rated voltage 380 V Rated current 388 A L
1x(Code G) No load current 13
Weather King8101-475
Frame 447/9T Output 350 HP (260 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1480 rpm Slip 1
Amperes 2542 A LRC 5
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 16 AWG Motor Type 3640M Mounting Arrangement F1 Number of Poles 4 Overall Length 16
Catalog Number EGDM2515T Enclosure OPSB Frame 254TZ Frame Material Steel Frequency 60
00 IN Power Factor 74 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
10 A Rated torque 3
