Davies Craig EWP150 Mounting Bracket Cradle TAB Mount with Anti Vibration TPS Sensor

Davies Craig EWP150 Mounting Bracket Cradle TAB Mount with Anti Vibration TPS SensorDavies Craig EWP150 Mounting Bracket Cradle TAB Mount with Anti Vibration How do you reliably mounting the Davies Craig EWP (Electric Water Pump) as solid mounting is a no go unless you like vibrations ringing in your ears!? Heres your answer The pump has a plate fixed to it using the OEM bolts and holes (provisions for extra fixings if you want) This is then in turn is mounted to the main base plate via four rubber mounts to keep it free from as much

WFM Volvo S40/V50/C30/C70 EPS Mounting Bracket

It is equipped with a LED status diode for fast diagnostic and a 120 Ohm terminator that can be switched on or off to relieve the user from applying external terminators

Used to increase Wi-Fi signal strength

14 BAR (EFI engines) Flow rate 255 LPH Safe for ethanol   Up to 15% blend

Link G4 Storm

We offer a unique selection of fuel pressure regulators used in motorsport worldwide

2 x Link Stickers

The TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device

An additional advantage of the PMU system is the ability to define logic for controlling outputs

but the Razor PDM can handle up to 100 Amps of continuous combined current

and difficult diagnostics

Total of 31 outputs and 24 inputs