Bando P120L075 SD QD Timing Belt Pulley (SD) DBando P120L075 SD The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
00 % Rated voltage 415 V Rated current 66
Stop Pushbutton
5/2 TE RPM 1750 1/MIN IEC FRAME D90D ARM V 180 INSUL F DUTY CONT BRG/DE 6206 BRUSHES 2/BP5000T15 BLANK IEC60034-1
12 IN Power Factor 87 Product Family Wash Down Pulley Face Code C-Face Rodent Screen None Service Factor 1
Catalog Number XL040322A Enclosure XPFC Frame 48 Frame Material Steel Frequency 60
10-0000-0400 HP 20 RPM 1175 VOLT 575 AMP 21 RATING 40C AMB-CONT NEMA-NOM-EFF 91
0 Current @ Voltage 24
Amperes 496/248 A LRC 6
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals BLUETOOTH CULUS WEEE Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 10
MACH MN902 MANUAL FOR BELT GRINDERS
by controlling the voltage applied to the motor
1 POLES 4 NUMBER SPEEDS 1 RPM 1785 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 445 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE RE OPPOSITE END BEARING 6313-J SHAFT END BEARING 6220-J AMBIENT 40 SERVICE FACTOR 1
