Bando 3-7MS615 Banflex Combo Synchro-Link KPS Polyurethane (Metric)Bando 3 7MS615 Ideally suited for short center distances and small diameter pulleys, BanFlex Combos banded construction minimizes or eliminates the turnover problem normally associated with small cross section belts. The ribbed construction provides superior flexibility while maintaining lateral stability. Precision molded, seamless polyurethane ribs provide maximum resistance to oil and traditional lubricants with virtually vibration free operation.
250 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1775 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Load 93° C Start Configuration DOL Break-Down Torque 72
Bando - 9B51 To resolve problem applications where belts are flipping over or jumping out of the sheaves
VDM3538 SPEC
Bando - 200J10 Rib Ace® is an ultra-thin
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating IP56 KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 1800 rpm Motor Lead Exit Ko Box Motor Lead Termination Ring Terminals Motor Lead Quantity/Wire Size 3 @ 12 AWG Motor Type 1054M Mounting Arrangement F1 Number of Poles 6 Overall Length 28
Bando - B443 Continuous improvements in materials
36Q215X955G1 HP 7
Standard NEMA MG-1 Frequency 60 Hz Voltage 230/460//190/380 V Number of poles 6 Degree of Protection IP55 Synchronous speed 1200 rpm Output rating 3 HP Mounting B3L(E) Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC
Bando - 10-8V1700 To resolve problem applications where belts are flipping over or jumping out of the sheaves
Fuse (type 2 coordination) 50gL/gG Short circuit protection with fuses (gL/gG) 6gL/gG Height 72 mm / 2
Bando - SDS 2 The original sheave and pulley mounting system developed to facilitate installation and replacement of components
