CRL Screen Door Latch and Pull with 3-7/8" Screw Holes Spline Tool Combination Rollers

CRL Screen Door Latch and Pull with 3-7/8" Screw Holes Spline Tool Combination RollersFeatures Used by Several Patio Door Manufacturers This CRL Screen Door Latch is non handed and requires mortise installation. The latch has a molded plastic housing with stamped steel hook and actuator lever. Latch is installed into a mortised slot in the edge of the door. It is used by several patio door manufacturers. One plastic latch housing with steel hook, latch lever, strike and installation screws per package.

Adjustable Shelf Height for Storing Screen Supplies

This CRL Screen Tight™ Vinyl Screen Frame Sample Pack contains a small cut of both pieces so that you can see how the system works

Latch is non-handed and has a side mount design

Magnetic Closure

This plastic CRL Latch and Pull has a sliding activator to engage the steel latch

and will last much longer than typical fiberglass screen mesh

then open the flap and using a utility knife cut the inner screen cloth away

It has a steel latch and a plastic latch activator

Lay the frame onto the table so that the frame engages all 12 clips

3 to 11 mm) screen frame

100 each or on cards of 8 with screws

83 m) wide