BRAKE HOSES - 3008 Position:Rear

BRAKE HOSES - 3008 Position:RearModel: 3008 MK1 1. 6 Front Thread Measurement 1 Female M10 x 1 Thread Measurement 2 Male M10 x 1 Placement on Vehicle Front Axle Type Brake Hose Length 1 465 mm Rear Length 1 210 mm Thread Measurement 1 Female M10 x 1 Brake System Bosch

9 x Exoracing Titanium Grade 5 Nuts

Place the turbo back into location with your new turbo gasket

Length: 1203mm

We now also offer an Exoracing lifetime warranty against manufacturing defects on all of our titanium bolt kits

depending on which vacuum you need to pull

Tighten the worm drive clip using a socket or Phillips head screwdriver until secure

make sure the fitting is perfectly seated on one of the flat edges

Once you are happy there are no leaks run the car through a few heat cycles

Although they create a strong seal

Model: Civic EP3

Remove the oil drain line from the turbocharger and remove the existing oil drain flange using the two bolts

000 cycles with less that 5% deformation