Fasco D1245 OEM Replacement Motor, 1/20 HP, 1 Ph, 60 Hz, 208-230 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO ELECTRONIC MODULES (CONTROLS)

Fasco D1245 OEM Replacement Motor, 1/20 HP, 1 Ph, 60 Hz, 208-230 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO ELECTRONIC MODULES (CONTROLS)OEM Direct Replacement Motor 3. 3" Diameter Permanent Split Capacitor (PSC); Capacitor Required: 4 Mfd 370 Volts (Supplied with Motor) Thermally Protected Open Shaft End and Opposite Shaft End End Frame, Enclosed Shell, Air Over Class B Insulation, 40C Ambient Sleeve Bearing 5 16" Diameter Shaft with Flat 11" Leads with Molded Plug Extended Studs Shaft End Additional Information Thermal ProtectionThermally Protected Speed1550 rpm Current0. 30 A Number

CAT NO VPECP4313T HP 75 FRAME 365VP D

Amperes 1480 A LRC 7

UL approval UL1077 Trip curve C Number of poles 1 pole Rated current 6 A Maximum voltage 277 VAC Type Thermal-magnetic Downloads

75 HP - TE - 1760 PHASETYPE 3_PHASE MOTOR ENCLOSURE TE HORSEPOWER

500 KW @ 60 HZ Phase 3 Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Voltage @ Frequency 460

Model_Number S055RAG7855R12B PRODUCT NAME

8 a Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 12 AWG Motor Type 0948M Mounting Arrangement F1 Number of Poles 4 Overall Length 24

1x(Code G) No load current 110 A Rated torque 1060 ft

719 MOUNTING HUB/STUD MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 40 ROTATION CCW LEAD END REV SERVICE FACTOR 1 RUNCAPMFD 5 RUNCAPVOLTS 440 SHIPPING WEIGHT 16 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 31

Frame 160M/L Output 15 kW (20 HP) Number of Poles 4 Frequency 50 Hz Rated speed 1470 rpm Slip 2

125 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1775 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

Model_Number CV14 PRODUCT NAME 75 HP - TEFC - 1785 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC HORSEPOWER 75 KILOWATTS 55