Copper Brake Pipe Repair Kit Flaring Tool DIN suitable for BMW 7 Series All Years Grates & Ash Pans

Copper Brake Pipe Repair Kit Flaring Tool DIN suitable for BMW 7 Series All Years Grates & Ash PansThis professional kit includes everything you need to repair and replace old corroded brake pipes. Suitable for BMW 7 Series all years. (M10 Unions with DIN Flare). British made flaring tool with precision machined punch and die blocks produces an OEM specification DIN pipe flare the same as the original. Flaring tool can be used on the car in situ allowing pipes to be joined on the car and be replaced in smaller sections. High quality pipe bender

Approx 25cm total length

A stern tie is used to reduce anchor swing in tight mooring areas

Total length of the torx sockets – 100mm

Height: 9cm (Red) & 6cm (Green)

Ideal for holding small items such as circuit boards for soldering or modelling etc

300mm Extension bar

Double check valve

• Hardened striking surface

Go-thru socket wrench (this means that the inside of the socket is completely hollow allowing longer threaded items to be undone as well as standard ones)

Comes complete a solid straight 12mm drift 160mm long and what this is for is that if the wheel nut gets stuck in the end put it through the socket and knock it out with a hammer

Simply pull off you existing seal to check if this is the correct profile you need

HSS drill set metric drills ranging from 10mm – 15mm