3/4X4X96FSB Bucket Pin

3/4X4X96FSB Bucket Pin3 4" x 4" x 96" Flat single bevel, weld on cutting edge. Good to weld under the front edge of your bucket to give it a wear surface or to replace the front lip of your bucket. If it becomes the new front lip of your bucket you can drill or blow holes in it to match a bolt on edge if you like.

CUTTING EDGE

This Universal Bucket Pin is 40mm in diameter with a length of 13

Its OD is 140mm and length is 100mm

This bolt on Cutting Edge has an industry standard part number of 1U0294 and has 3 bolt holes

1"x4-1/2" plow bolts and cone nuts sold separately

This bolt on Cutting Edge has an industry standard part number of 1400983 and has 10 bolt holes

WELD ON CUTTING EDGE BOLT PROTECTOR FOR 1"

Use a v13-17pn pin with this tooth

This is a 37lk "horseshoe" lock for use with 37syl series bucket teeth

You can weld this adapter on if you choose

This bolt on side cutter (can be welded on) is used on excavator buckets and has an industry standard part number of 7y0358 also known as 8J9614

This bolt on Cutting Edge has an industry standard part number of 11Y7212330 and has 5 bolt holes