Lightforce Harness To Dual Switch 8 Pin Adaptor (SI)

Lightforce Harness To Dual Switch 8 Pin Adaptor (SI)Our New 8 Pin Adaptors Are Designed Specifically To Connect A Range Of Lightforce Switches To A Range Of New Generation Lightforce Harnesses With Slimline Connectors. With These New 8 Pin Adaptors, You No Longer Need To Use Solder, Plugs Or Crimps Connectors To Wire Your Lightforce Switch To Your Lightforce Harness. The Plug And Play Installation Means Reduced Diy Install Time Because You No Longer Need To Identify And Connect Individual Wires And You

Spf2413k - Rear Control Arm Upper-Inner Bush Kit - Double Offset

2mm Shank Wall Thickness

Oem Certified Mounting Hardware Allows For Easy Installation

Instant On

Included In The Program Is An Upgraded Base Plate Measuring A Whopping 205x460mm

A Thicker Side Plate Allows For Improved Strength Over Oem (Original Equipment Manufacturer)

Shock Absorbers To Chassis Rail That Can Cause Your Shock Absorbers To Be Bent

With More Output Than Ever Before

Sup9a) Our Leaf Springs Are Built To Perform

Unscrew The Eyebolt

Note: Always Ensure Your Original Harness Is Rated To Handle The Increased Load (Current) When Adding Additional Lights And If Required The Fuse Replaced With A Suitable Rating

Note: All Vehicle Accessories Should Be Wired Through A Fuse If The Included Harness Is Modified During Installation Ensure A Fuse Is Used As Close To The Input Source As Possible Not Exceeding 5 Amps