Es-125 - Red Black Red sprague

Es-125 - Red Black Red spragueThis pickguard will only fit genuine Gibson ES 125TCD with two pickups and a sharp cutaway and it will not fit ES 125 T or Epiphone versions. For ES 125T please see our EST 7600 series guards Made from 3 ply shiny red black red plastic material, 2. 3mm thick. We cut this with a 45 degree bevelled edge and there is a clear protective film on top to protect the pickguard during installation.

The surface has a matte finish to replicate the wear from many years of use

Commonly used for Precision Bass

Not all CTS pots are alike - the CTS pots that we stock are the top-of-the-range 450 series and are developed using 9% +/- tolerances and built at 10% over the standard 500K rating (550K)

there are no height screws in the saddles and each saddle is a different diameter so that they purposely sit at different heights to compensate for the fingerboard radius

Voltage rating: 100vMaterial: Polypropylene Capacitance Tolerance: +/- 10%Lead Pitch: 10mm

The Upgrade Plus kit consists of:

With a slightly smaller modified footprint for a builder it allows in different headstock shaping that a larger footprint can hamper along with reduced weight

open gear tuners

The Kent Armstrong Burns Tri-Sonic V pickup is enclosed in a Gold cover

Audio Taper (Logarithmic)

87mm total pickup cover length

this works great in the bridge position of a Strat when coupled with two singlecoils in the other two positions or simply use 3 of these pickups to provide hum-canceling in all switch combinations