Bando TL1210 1 3/16 TL BORE 1 3/16 (1.1875) 7PK

Bando TL1210 1 3/16 TL BORE 1 3/16 (1.1875) 7PKBando TL1210 1 3 16 TL bushings are preferred where mounting space is at a premium. The TL bushing can only be installed in the conventional (large end outboard) position.

25 MOUNTING CRADLE/STUD MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 40 ROTATION CW/CCW SERVICE FACTOR 1

Special Software Pump Genius Multiplex Line Voltage 200-240V Output Amps 3~ Line Amps 13A Frame Size A Attributes

Bando - 9-3VX1060 Power Ace® Cog Combo

Frame 160L Output 11 kW (15 HP) Number of Poles 6 Frequency 50 Hz Rated speed 978 rpm Slip 2

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Current @ Voltage 274

500 HP @ 60 HZ Phase 1 Synchronous Speed @ Frequency 900 RPM @ 60 HZ Voltage @ Frequency 115

39 % Rated voltage 460 V Rated current 59

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 3740M Mounting Arrangement F1 Number of Poles 4 Overall Length 17

83 USABLE AT 50HZ 30HP 190/380V 88/44A Performance

01 HP - TEFC-IP55 - 965 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC-IP55 HORSEPOWER 2

M1519 SPEC

541 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B LOCKED ROTOR AMPS 3