Lambretta 225cc TS1/RB Piston Kit Reed Valve 70mm + Oversizes Scomadi

Lambretta 225cc TS1/RB Piston Kit Reed Valve 70mm + Oversizes ScomadiLambretta 225cc TS1 RB Piston Kit Reed Valve 70mm + Oversizes Select 70mm for TS1 and RB Kits 70mm and four graded oversizes up to 70. 08mm for worn Cast Iron Cylinders. 71mm available for cast iron cylinders. 16mm Gudgeon Pin, Two Chrome 1mm Wire Piston Rings. Holes for Reed Valve Motors. K. H. C. Brand We have used this brand piston on our Suzuki 190cc and Suzuki 225cc Conversion Kits since the 90's with no issues. This is the 225cc reed valve

Two Female

Total length tip to tip 8 cm

See attached pdf

Mixing ratio up to 1:100 in accordance with the operating instructions

benelli 491 lc

PIAGGIO 50 NRG POWER DT SERIE SPEC 2007 2008

BENELLI - ALL 50cc

Red is shown as primary colour

Lambretta Series 1 2 3 Standard Cylinder Head Cowling

and a colour of your choice from the available below for the fabric

Vespa PK50 XL Crankshaft -Large Taper 20mm Italian

part number VE26033 can be substituted by unscrewing the old brass centre pin from the stator body and running a 5mm drill by hand down the thread to remove it